Is a washable air filter any better than a disposable air filter?


The air filter in your furnace is there to prevent dust and debris from causing any damage. But constantly replacing the air filter once it’s dirty can be a task that most not only forget, but are less likely to do. Many  air conditioning experts say that most homeowners refer to their air filter as “out of sight, out of mind”, which is why they tend recommend washable air filters. Basically, a washable air filter can be cleaned and reused whereas a disposable filter needs to be regularly replaced. Comparing a regular air filter to a washable air filter has, of course, it’s positives and negatives too each. Let’s look at each in more detail …

The first and most obvious factor is that washable air filters are much more environmentally friendly. With this, they can last up to 5 years if cleaned regularly and throughout that amount of time, you would have gone through lot of disposable filters, and that equals savings. Washable filters do, however, tend to be more expensive than disposable filters but due to the fact they can be reused. Even the most expensive disposable filters will end up working out costing less in the long run. Unfortunately, many HVAC professionals say washable filters are also less efficient than the equivalent disposable filter. These filters are just not as good at trapping the smallest dust particles which can reduce the whole systems efficiency. You can tell how efficient a filter is based on the Minimum Efficiency Reporting Value (MERV) rating. A rating of 1 indicates the least efficient filter up to a rating of 12 which is the most efficient filter.

The amount of maintenance that’s required is another factor that should be taken into consideration. A reusable filter will require washing and drying once a month whereas some disposable filters only need replacing every 3 months. This means a lot more work goes into maintaining a washable filter and it will never get completely clean. Over time the dirt will build up and reduce the efficiency of the system. At which point even a washable filter will need to be replaced. In all a washable filter will save you money over a disposable filter. It is also more environmentally friendly, but it will reduce the efficiency of your system. Always remember you can contact your local heating and cooling service provider for further recommendation on choosing a washable or disposable air filter.

Can spraying water on your home’s ac unit reduce electricity bills?


One of the craziest myths air conditioning service providers talk about is the idea that you are able to reduce energy bills by spraying water onto your home’s ac unit. The idea is that if the air around your AC is cooler then your AC won’t have to work as hard to keep your home cool. This seems reasonable, but in reality it seems unclear if it actually works. When air conditioning experts tested this theory, having water sprayed onto the condenser seemed to make no difference to the effectiveness of the system. It’s very difficult to tell if any energy is being saved without proper testing but it seems that there’s no noticeable energy saving.

Over time, any surface which has water being continuously sprayed over it will eventually develop mineral deposits. This is especially relevant in areas with hard water such as Las Vegas, as hard water is more likely to form mineral deposits. Heating companies say these mineral deposits will build up on the aluminium fins that dissipate the heat from the copper piping. Over time these will bend and break from the weight of the mineral deposits. This kind of problem will almost certainly lead to you needing a replacement AC. So in all you’ll be unlikely to save enough money on electricity to make up for that huge cost. In fact this technique is unlikely to save you very much energy anyway so the best bet is probably to avoid it.

Swamp cooler versus an air conditioner… what’s the difference


On occasion, heating and cooling companies will be asked about swamp coolers. But, most homeowners are unaware of what this is, more or less what it does. More or less, a swamp cooler, also known as an evaporator, consists of a pump that sits in a container full of water. The pump draws water up and leaves it to drip down heated pads. The pads evaporate the water whilst a fan distributes the now cooler air around the room. The pump will sit outside your home and cool the air form the outside. It is then directed into your home via the fan. This method is much cheaper than an air conditioner but there are some problems with it. For a start the hotter it is outside the less effective it will be. Water evaporating will only cool the air so much, so when it’s really hot you may just end up with hot air being blown around your home.

The swamp cooler will cool the outside air whereas and AC will continuously cool the inside air. This means that the AC is cooling already cooled air allowing the temperature to get much lower than a swamp cooler can manage. According to heating companies, another disadvantage of the swamp cooler is that it increases the humidity of the air. Having a high humidity tends to have the effect of making people hotter. So not only will the swamp cooler not be able to cool that effectively it will also result in a really humid atmosphere. Whereas an AC does exactly the opposite, it removes humidity for the air.

Both swamp coolers and AC units require regular maintenance. The swamp cooler will probably need cleaning more often and this is because it’s constantly reusing the same water. As a result, this is a perfect place for bacteria to survive if it isn’t cleaned regularly. In all, a swamp cooler will work well in less humid climates in all but the hottest weather. It will require more maintenance than an AC unit but also comes without the energy costs. Remember to contact your local air conditioning company for further information regarding swamp coolers.

Top benefits of preventative AC maintenance


Keeping your air conditioning unit properly maintained will keep it running at it’s full potential and ensure it doesn’t break down unexpectedly during the hot months of summer. However, there are some other benefits to maintenance that you may not know about.

For starters, heating and air service providers say you can cut the cost of your energy bills by a huge amount by performing simple maintenance such as cleaning. Having a clean air filter allows your system to circulate air much more easily so it doesn’t have to work as hard to achieve the same temperature. Also a dirty condenser coil will force the compressor to work harder which uses more electricity, which you have to pay for.

The repair costs for AC’s can be quite high and can mostly be easily avoided. Performing preventative maintenance catches any small problems which could lead on to more serious and expensive repairs. For instance a dirty coil will put the compressor under strain leading it to break down, which is expensive to fix. By getting regular maintenance done you catch all those little problems before they build up. Maintenance may seem expensive at first but when weighed up with repair costs you’ll realize how much you save.

Finally, your system will live a much longer and more effective life if it’s properly maintained. If one part of your air conditioning unit starts to show signs of wear it will put a strain on your whole system. What began as an easily fixed problem stresses the entire AC causing other parts to fail. Doing maintenance will allow your system to work at its full potential and live a much longer life. So in all preventative maintenance will: keep your system at high efficiency, it will prevent problems turning into much bigger repairs and will prolong the overall life of your system. If that isn’t enough for you, all of those things will end up saving you money in one way or another

Learn the Basics about Home Gas Boilers


A gas boiler is a piece of equipment used by many homeowners as a means of providing warmth and heat inside their houses. It works by converting water into steam which is then carried throughout the radiators then eventually heating up the rooms within your house. Among any other types of boilers, gas boilers are the ones which proved to be very helpful in cutting down costs simply because natural gas costs less than that of oil boilers.

One can benefit many HVAC experts claim from using a gas boiler simply because the maintenance service doesn’t costs that much and operating this type of boiler is very economical. Also, gas boilers are far more efficient and heat water much faster than any other types of boiler.

Basic troubleshooting and maintenance for your gas boiler system

Just like any other boilers, a gas boiler needs to undergo regular maintenance checks by professional heating and air services to ensure that it is in excellent running condition. But right before you call for the services of an expert technician to fix your boiler’s issues, here are a few things you can do:

  1. Check out your boiler’s pilot light to see if it’s still working. In case it no longer works, you will have to call for an air conditioning Dallas technician to fix the problem for you. Also, don’t forget to check if you smell any trace of gas since this could be due to an existing leak which could be very hazardous.
  2. Check the thermostat regularly and find out if the temperature is set at the right levels.
  3. Check the power source which provides power to your boiler. You can do so by resetting your breaker to see if it still works.

Living inside a house with no boiler or heating system at all is somewhat impossible particularly in places where cold seasons are prevalent. So if you are planning to install a heating system inside your home, then a gas boiler would make an excellent choice. You won’t only provide efficient heat inside your rooms, you also save lots of costs as well.

Tips for winterizing your home’s ac unit


As winter approaches, take some time to properly shut off and prepare your air conditioning unit for the coming months. Doing this will help your heating and air system survive unharmed through the winter and keep it working properly for much longer. To start with find the circuit outside and switch your AC off at the disconnect switch. This will help to prevent damage to your AC and will protect you from electric shocks. This will also stop the air conditioner from switching on during the winter, which would allow water to get in and damage the AC. There’s also a danger that your AC could freeze up completely if it’s left connected which would cause serious damage.

Next remove any debris that’s blocking up the outside unit and clean off any dirt that’s accumulated around the compressor. Wash it down with a hose so that come summer you can be sure your AC is ready to go. Leaving leaves and dirt cluttering the unit can result in a horrible mulch clogging everything up come summer. Once your outside unit is properly cleaned make sure to leave it to dry completely before covering it up. Any water that remains will cause rust too form and this could result in repairs being needed.

Once the unit is dry cover it over with a thick plastic covering or a tarpaulin. Make sure to secure it tightly so that there’s no chance of parts coming loose. Also check that it’s completely covered and that there are no gaps that could allow debris through. Any debris that makes it’s way through could cause long term damage in the future. Once all this is complete you should be able to forget about your AC for the winter. Come summer you’ll be able to start it back up again with no problems at all. Also, remember that come summer, it’s recommend that you have your unit serviced by heating and air professionals to make sure it is ready to take on the blsitering temperatures and heat.

What type of furnace maintenance do you really need?


You don’t need a air conditioning repair company to tell you that regular furnace maintenance is very important to ensure your furnace continues running at its most efficient. But the question is, what type of furnace maintenance do you really need? Let’s discuss…

One of the easiest ways to maintain your furnace is to change the filter on a regular basis. A clean filter allows for proper air flow so that the warm air can easily travel around your home. A clogged filter will force the furnace to work harder and this can lead to expensive repairs. Also consider upgrading your air filter as the newest models are much more efficient and will help to keep costs down.

Once a year it’s important to get a heating and air technician to check your system over and perform any repairs that need doing. They will do a number of checks on your system such as checking the heat exchanger and inspecting the wiring. Getting this maintenance done is like giving it a health check and will make sure your furnace continues to run properly. Avoiding this regular check up will only result in small problems becoming much worse and resulting in costly repairs from Dallas air conditioning companies.

If you don’t have one already, go out and get a carbon monoxide detector. This going off can be a sure sign that something has gone wrong with your furnace. Not only that but this small device could save your life. Don’t forget to change the batteries though, it’s no good to you if it doesn’t work.

Finally if you have an older model thermostat it’s worth having it checked out as they can develop faults. Keeping your thermostat fully operational will ensure you don’t end up with an unidentified issue surfacing. Also consider upgrading to a programmable thermostat as these are much easier to maintain. Keeping your furnace up to date with it’s maintenance checks will ensure it doesn’t break down when you need it the most.

The benefits of changing your home’s furnace filter are …


Just about any heating and cooling service will tell you that changing your air filter is important to keep your furnace running smoothly. Because of this, we’ve outlined some of the reasons of why doing this small bit of maintenance is so important.

First and foremost, replacing your air filter on a regular basis will lengthen the life of your entire heating system. When the air filter gets clogged up, it prevents the air from flowing properly throughout the system. Left clogged long enough, this will lead to overheating which often leads to the furnace breaking down much more quickly. By changing the filter you’re potentially saving thousands on repairs or replacements.

Another benefit to changing your filters is that a clean filter reduces the amount of energy needed to run the furnace. With a clogged filter, the system is working harder to pump the same amount of air around your home. Simply by replacing the filter you’ll be reducing your energy bill by a surprising amount. This is one of the best ways to reduce your energy use if you’re looking to be more environmentally friendly and keep your carbon footprint down.

One of the best reasons to remember to change your air filters regularly is for the quality of air in your home. A clean air filter will remove most of the dust and pollen particles that would otherwise be in the air. This can be really helpful for asthmatics or those that suffer from allergies. It’s also been found that cleaner air helps to prevent breathing problems from developing in the first place. On the other hand if you forget to change you filter it may actually start to leak dust back into your home.

It is so important to change your air filter. Not only will it save you money and energy but it will also lengthen the life of your system. A clean air filter can even have some unexpected health benefits so it’s definitely worth doing. The best part about this type of maintenance, is that you do not need an air conditioning service company to help you with changing your filter. Changing the air filter is a fairly straight forward process that just about anyone can accomplish.